Geneva drive
Step per turn
Moving
Resting
The crank turns steadily; its pin drops into a slot, flicks the wheel round by one slot, and leaves. Between visits a round lock holds the wheel still.
The geometry
- With centre distance c and n slots, the pin circle radius is r = c sin(π/n), so the pin enters each slot along the slot: no knock.
- The wheel moves while the crank turns 180° − 360°/n, so it moves for (n − 2) ÷ 2n of each turn and rests for the rest: 25% moving with 4 slots.
- Wheel angle while engaged: φ = atan2(r sin α, c − r cos α), α the crank angle from the line of centres.
Tested: tangential entry, one slot per turn and the moving share, for 4, 5, 6 and 8 slots (packages/mechanics/test/classics.test.ts). The locking disc is drawn as a simple circle.
Example
With slots = 4, crank speed 20 rpm: step per turn: 90°; moving: 25.0%; resting: 75.0%. Open this setup, then change one thing at a time.
Related: Cam and follower · Four-bar linkage · Gear ratio