Lead screw calculator
For 3D printers, CNC and linear actuators: the lead of a multi-start screw, firmware steps per mm, speed and the motor torque a load needs.
The formulas
Lead = pitch × starts: a screw with 2 mm pitch and 4 starts moves the nut 8 mm per turn. Steps per mm = motor steps per turn × microsteps ÷ lead, so 200 × 16 ÷ 8 = 400. Travel speed = rpm × lead.
Torque comes from balancing work: one turn puts in torque × 2π and moves the load by one lead, so torque = force × lead ÷ (2π × efficiency). Efficiency depends on the thread, nut material and lubrication; the 40% default is only a placeholder, so use your screw's datasheet value. The result doesn't include the torque to accelerate the load or to overcome preload.
Tested: a T8 screw with 2 mm pitch and 4 starts has an 8 mm lead and needs 400 steps/mm at 200 steps × 16 microsteps (packages/mechanics/test/maker.test.ts).
Related: Rack and pinion · Worm drive · 3D print cost calculator