Pressure relief valve
The same balance as a check valve, used as a safety device: the valve stays shut until the tank pressure reaches the set point, then lifts and vents so the pressure can't keep climbing.
The physics
- Set pressure: pset = k x₀ ÷ A, the spring's preload force over the seat area.
- Full lift: to open all the way the spring compresses by the lift as well, so the pressure must rise to k (x₀ + lift) ÷ A. A stiff spring with little lift keeps that overshoot small.
Real relief valves add features this static model leaves out (such as a larger area for the escaping flow to push on, so they snap open), and safety valves are sized and certified to standards: don't set a real one from a calculator. Tested: the set pressure against a hand calculation, and lift that rises linearly above it and stops at full lift (packages/mechanics/test/fluids.test.ts).
Example
With spring rate 2 N/mm, spring preload 6 mm, seat diameter 5 mm, full lift 2 mm: set pressure: 6.11 bar (88.6 psi); pressure at full lift: 8.15 bar (118.2 psi); above set at full lift: +33.3%. Open this setup, then change one thing at a time.
Related: Check valve · Water pressure at depth · Coil spring rate calculator