Check valve (non-return valve)
A spring holds a poppet against a seat. Pressure from the left pushes it open; pressure from the right only presses it harder onto the seat, so flow can only go one way.
The physics
- Cracking pressure: the poppet lifts when the pressure difference times the seat area beats the spring's preload force: Δpcrack = k x₀ ÷ A, with A = π d² ÷ 4.
- Lift: above that the spring compresses further: lift = (Δp − Δpcrack) A ÷ k, until the poppet reaches its stop.
This is the static balance only: in a real valve the moving flow also pushes on the poppet and the seal touches over a slightly different area, so a measured cracking pressure is close to this but not exact. Tested: the cracking pressure against a hand calculation, and the lift limits (packages/mechanics/test/fluids.test.ts).
Example
With spring rate 2 N/mm, spring preload 4 mm, seat diameter 10 mm, peak upstream pressure 2 bar: cracking pressure: 1.02 bar (14.8 psi); valve now: shut; pressure for full lift (6 mm): 2.55 bar (36.9 psi). Open this setup, then change one thing at a time.
Related: Pressure relief valve · Float valve (ballcock) · Coil spring rate calculator